Degreasing fluid filtration:

Process description
 
The automobile coating process is generally divided into the surface treatment of the metal before coating (pre treatment technology) and the construction technology of the coating. The surface treatment to remove surface oil, dirt, corrosion and repair work of old paint layer removal, to improve the surface condition of the workpiece; the workpiece surface adhesion impurities by pre degreasing, degreasing process residue in degreasing tank, working fluid through the filter and oil-water separation can be recycled after use.
 
Problem description
 
In the degreasing process,The removed dirt will accumulate gradually in the bath. The degreasing efficiency of degreasing agent in the degreasing solution is usually proportional to the cleanliness of the solution, in order to obtain satisfactory degreasing efficiency and prolong the service life of the tank.,It is necessary to remove the dirt from the solution as soon as possible, which is necessary for the circulation of the liquid in the closed circuit. At the same time, it can avoid the blockage of the nozzles and pipes or even the damage of the pump, and the impurities re attach to the workpieces, which will affect the quality of the coating.
 
Product advantage
 
•Automatic removal of ferromagnetic powders and particles and iron oxide
•Small and weak magnetic impurities can be captured
•Requirements for heavy pollution and Gao Jie's cleanliness
•The initial cost is low, and the filter bag is replaced directly without changing the equipment.
•popFilter bag can significantly improve the filtration efficiency85%Increase the amount of pollution,ThreeMore than ordinary filter bag life, reduce the number of filter bags, quickly and effectively reduce the cost of material and labor
 
Product application
 
Pre degreasing:
FerrocleanMagnetic filter
Bag filter
 
Skim:
jumbo / popA large sewage filter etc.